ASSEMBLY
Now, working in a clockwise direction, attach all of the remaining smaller
springs. Make sure the V-rings and frame holes line up correctly.
(Remember, you’re the boss here. You tell those springs what to do! And
other people if they’re helping...)
STEP 17
10
Spring (x28)
Lay the two frame pad (12) pieces on the frame. Adjust the frame pad so
that the slits are directly above the sockets. Tie the two frame pad pieces
together with the attached straps.
Important: Don’t use the trampoline without the frame pad. It’s designed to
protect your little jumpers! Trust us on this one.
STEP 18
12
Frame Pad (x2 pieces)
16
To Next Page
Loading...
