EasyManua.ls Logo

Slackers Skate Swing - Installation Procedures; Tree Branch Installation; Mandatory Load Test

Slackers Skate Swing
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
4/23/18
/2018
b4 Adventure 4010 Holly Street Unit 16 Denver Colorado 80216 1-844-834-4334
QUESTIONS? info@b4Adventure.com · www.slackersline.com/help-center/ 303-339-0482
Product #-
SLA.823
Age
Range-
5-
99yrs
Weight Limit-
250lbs
(113kg)
Max 2 people
Tree Branch Installation
If installing on a tree branch, we recommend using our Tree Hangers B4A.109- 6ft and B4A.110- 12ft). We recommend using 2 tree hangers so you
can space out the attachments points for comfort and head clearance
-After sleeves are installed, attach the Skate
swing into two pockets on the Ninjaline
-Ninjaline sold separately
- To adjust the hand bars, simply pull the
rope through and adjust up or down
If attaching the Skate Swing to a Ninjaline or a tree you MUST perform the
LOAD TEST:
- 2 ways to test: Place 350 LBS test weight in the chair or suspend 350
LBS (159kg) by attaching it to the hanging rope/hanger. This can be
done by having a 350LBS (159kg) person/s grip the looped
rope/hanger ends with both hands and SLOWLY pull themselves up,
placing weight gradually on the installation.
CAUTION: At any time during the test, if any weakness is heard or felt, stop
the test and either select a different location or replace damaged parts

Related product manuals