How to imprint on Emboss-a-Plates
SLE Emboss-a-Plates are vacuum plated in gold or silver with an adhesive backing. They are an
excellent alternative for those who do not want to stamp directly onto photo albums leather bibles, as
well as those hard to mark items such as centerpieces, desk sets or trophies.
1.Set the temperature to about 280 degrees.
2. Set the 1-Line or 2-Line Type Holder according to the instructions on typesetting. The most
common type sizes for imprinting on Emboss-a-Plates are 12 and 18 points. Use A-series
black foil for this project.
3.Insert the Type Holder into the Adapter Sleeve.
4.Secure the included Emboss-a-Plate Guide on the Printing Table using the Gauge Bar.
5.Place the Emboss-a-Plate onto the Guide.
6.Bring the handle down and imprint with firm pressure and medium dwell.
Emboss-a-
To Next Page