How to Imprint on Larger Items.
When imprinting larger items such as, satin pillows, albums, scrapbook covers, stationery, greeting
cards, invitations and announcements, use the Extended Printing Table.
Because of its remarkable versatility, the Extended Printing Table is one of the most functional of all
the SLE machine accessories. Properly used, the Extended Printing Table can dramatically increase
production and enhance the print quality with significantly less effort.
1. Slide the Extended Printing Table onto the regular Printing Table from the front. Secure in
place by tightening the clamping screw on the right side.
2. Select the proper foil for the article to be imprinted. For satin pillows or albums use S-series
foil. For paper articles use H-series foil.
3. Set the proper temperature for the article to be imprinted.
4. Set the Type Holder or Engraving Holder according to the instructions above on typesetting.
Use larger type such as 36-point or 72-point.
5. Insert the Type Holder into the machine.
6. Position the article onto the Extended Printing Table. If necessary, secure with the long
Gauge Bar.
7. Pull the Handle down to imprint.
Extended
Printing
To Next Page