1
2
3
1. Place connector on air valve stem and
push down.
INFLATE TIRES
4
To unlock the hammerhead
valve, pull handle upward,
then place in adapter and
push down to lock in adapter.
USING THE ADAPTERS
PULL UP TO
UNLOCK
PUSH DOWN
TO LOCK
4. Turn on inflator and when proper pressure
is reached, turn off inflator, unplug power
cord and remove connector.
*NOTE: Correct tire pressure can be found in vehicle
owner’s manual or on driver’s side door jamb.
3. Plug power cord into power outlet
receptacle.
2. Close thumb latch connector to secure
to valve.
To Next Page
Loading...
