INFLATE TIRES
12V
1. Attach quick connect air hose onto tire's valve stem and pull lever up to lock.
2. Plug power cord into 12 volt accessory power outlet.
3. Press on switch to turn on inflator. Inflate tire to manufacturer's recommended air pressure.*
When proper pressure is reached, press off switch to turn off inflator. Unplug power cord
and remove air hose connector.
*NOTE: Correct tire pressure can be found in vehicle owner's manual or on driver's side door
jamb.
USING THE ADAPTERS
PULL UP
TO LO C K
PULL DOWN
TO U N LOCK
1. To unlock the quick connect, pull
handle down.
2. Place the adapter into connector
and pull up on handle to lock in.
To Next Page
Loading...
