EasyManua.ls Logo

Sloan EBF-650 - User Manual

Sloan EBF-650
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation of the Sloan OPTIMA Plus EBF-615 or EBF-650 Battery Powered,
Sensor Operated Faucet makes wash-up totally “hands-free” providing the
ultimateinsanitaryprotectionandautomaticoperation.TheOPTIMA Plusfaucet
usesinfraredtechnologyto sensetheuser’spresenceandturnona watersupply
that has been pre-mixed to the desired water temperature. When the user’s
hands are removed from the invisible beam of light, the water supply
automaticallyturns off. In addition,the faucetis poweredbyfour “C” cell batteries
which eliminates the need to run any electrical lines to the system.
The SloanEBF-615 or EBF-650batterypowered, sensoroperatedfaucetcomes
complete with an integral faucet and sensor assembly, control module, alkaline
batteries (Size C), and all mounting hardware. Back checks and a grid strainer
are also available as optional equipment. The installer should supply 3/8 inch
copper supply tube or flexible hose connections.
The following instructions serve as a guide when installing the Sloan EBF-615
orEBF-650faucet.As always,good safetypractices andcare arerecommended
when installing your new faucet. If further assistance is required, contact your
nearest Sloan Representative office or the Sloan Installation Engineering
Department at 1-888-SLOAN-14.
EBF-650 I.I. Rev. 1 (06/00)
Code No. 0816321
INSTALLATION INSTRUCTIONS
BATTERY POWERED
SENSOR OPERATED
LAVATORY FAUCETS
EBF-615
EBF-650
Battery Powered
Sensor Operated
Lavatory Faucets
Includes Instructions for
Installation of Optional
Back Checks
Made in the U.S.A.
ANSI/ASME A112.18.1M
LIMITED WARRANTY
SloanValve Company warrants its EBF-615 and EBF-650Faucets to be made offirst class materials, free from defects of material or workmanship under normal
use and to perform theservice for which theyare intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of three
years (1 year for decorative finishes) from date of purchase. During this period, Sloan Valve Company will, at its option, repair or replace any part or parts which
prove to be thus defective if returned to Sloan Valve Company, at customer’s cost, and this shall be the sole remedy available under this warranty. No claims
will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or organizations who purchase Sloan Valve Company’s
products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the batteries.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENTIS SLOAN VALVE
COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.
EBF-615
EBF-650
Certified
Question and Answer IconNeed help?

Do you have a question about the Sloan EBF-650 and is the answer not in the manual?

Summary

Product Overview and Warranty Information

Installation Instructions for Faucets

Details on battery-powered sensor-operated lavatory faucets.

Limited Warranty Details

Covers material and workmanship for Sloan EBF-615 and EBF-650 faucets.

Important Installation Notes

Key considerations and warnings for faucet installation.

Pre-Installation and Initial Setup

Prior to Installation Checklist

Items to install before the faucet, including sink and drain.

Mixing Valve Installation

Instructions for integrating Sloan MIX-25-A or MIX-30-A.

Required Tools for Installation

List of tools needed for proper faucet installation.

Step 1: Install Back Checks

Optional step to install back checks for dual water supply.

Faucet and Control Module Installation

Step 2 A: Install EBF-615 Faucet

Procedure for mounting the EBF-615 faucet onto the sink deck.

Step 2 B: Install EBF-650 Faucet

Procedure for mounting the EBF-650 faucet onto the sink deck.

Step 3: Mount Control Module

Instructions for securely attaching the control module to the wall.

Step 4: Connect Sensor Cable

Connecting the sensor cable from the faucet to the control module.

Supply Line and Battery Installation

Step 5: Connect Supply Line to Solenoid Valve

Connecting water supply tubes to the solenoid valve outlet.

Step 6: Connect Supply Line(s) to Solenoid Valve Inlet

Connecting supply stops to the solenoid valve inlet.

Step 7: Install Batteries

Inserting four 'C' cell alkaline batteries into the control module.

Final Setup and Testing Procedures

Step 8: Start-Up Procedure

Activating the faucet and checking for proper operation.

Step 9: Range Adjustment

Adjusting the sensor's detection range for optimal performance.

Step 10: Install Control Module Cover

Securing the cover onto the control module.

Operation and Maintenance

How the Faucet Operates

Explanation of infrared sensor technology and water flow.

Care and Cleaning Instructions

Guidelines for cleaning chrome and special finishes.

Troubleshooting Guide

Sensor LED Not Functioning

Diagnosing issues with the sensor's indicator light.

No Water Delivery When Activated

Troubleshooting no water flow despite sensor activation.

Slow Flow or Dribble

Resolving problems with reduced water flow.

Faucet Wont Stop Water Delivery

Addressing issues where the faucet continues to run.

Temperature Control Issues

Troubleshooting hot/cold water mix problems.

Component Maintenance Procedures

Battery Replacement Procedure

Step-by-step guide for replacing batteries.

Cleaning the Screen Filter

Instructions for cleaning the filter in the solenoid valve housing.

Parts List and Information

Itemized Parts List

List of faucet components, part numbers, and descriptions.

Notice of Document Information

Statement regarding potential changes to document content.

Summary

Product Overview and Warranty Information

Installation Instructions for Faucets

Details on battery-powered sensor-operated lavatory faucets.

Limited Warranty Details

Covers material and workmanship for Sloan EBF-615 and EBF-650 faucets.

Important Installation Notes

Key considerations and warnings for faucet installation.

Pre-Installation and Initial Setup

Prior to Installation Checklist

Items to install before the faucet, including sink and drain.

Mixing Valve Installation

Instructions for integrating Sloan MIX-25-A or MIX-30-A.

Required Tools for Installation

List of tools needed for proper faucet installation.

Step 1: Install Back Checks

Optional step to install back checks for dual water supply.

Faucet and Control Module Installation

Step 2 A: Install EBF-615 Faucet

Procedure for mounting the EBF-615 faucet onto the sink deck.

Step 2 B: Install EBF-650 Faucet

Procedure for mounting the EBF-650 faucet onto the sink deck.

Step 3: Mount Control Module

Instructions for securely attaching the control module to the wall.

Step 4: Connect Sensor Cable

Connecting the sensor cable from the faucet to the control module.

Supply Line and Battery Installation

Step 5: Connect Supply Line to Solenoid Valve

Connecting water supply tubes to the solenoid valve outlet.

Step 6: Connect Supply Line(s) to Solenoid Valve Inlet

Connecting supply stops to the solenoid valve inlet.

Step 7: Install Batteries

Inserting four 'C' cell alkaline batteries into the control module.

Final Setup and Testing Procedures

Step 8: Start-Up Procedure

Activating the faucet and checking for proper operation.

Step 9: Range Adjustment

Adjusting the sensor's detection range for optimal performance.

Step 10: Install Control Module Cover

Securing the cover onto the control module.

Operation and Maintenance

How the Faucet Operates

Explanation of infrared sensor technology and water flow.

Care and Cleaning Instructions

Guidelines for cleaning chrome and special finishes.

Troubleshooting Guide

Sensor LED Not Functioning

Diagnosing issues with the sensor's indicator light.

No Water Delivery When Activated

Troubleshooting no water flow despite sensor activation.

Slow Flow or Dribble

Resolving problems with reduced water flow.

Faucet Wont Stop Water Delivery

Addressing issues where the faucet continues to run.

Temperature Control Issues

Troubleshooting hot/cold water mix problems.

Component Maintenance Procedures

Battery Replacement Procedure

Step-by-step guide for replacing batteries.

Cleaning the Screen Filter

Instructions for cleaning the filter in the solenoid valve housing.

Parts List and Information

Itemized Parts List

List of faucet components, part numbers, and descriptions.

Notice of Document Information

Statement regarding potential changes to document content.

Sloan EBF-650 Specifications

General IconGeneral
BrandSloan
ModelEBF-650
CategoryPlumbing Product
LanguageEnglish

Related product manuals