SMA ennexOS SUNNY PORTAL - Mounting Procedures (DIN Rail & Wall)

5 Mounting
SMA Solar Technology AG
Operating manual EDMM-10-BE-en-20 23
Dimensions for wall mounting:
ennexOS
DATA MANAGER
108 mm
(4.25 in)
162 mm
(6.38 in)
98 mm
(3.86 in)
90 mm
(3.54 in)
104 mm
(4.1 in)
Figure 4: Dimensions for wall mounting (dimensions in mm (in))
5.2 Mounting the product
There are two options for mounting the product:
• Mounting on the top-hat rail
• Mounting on a wall
Mounting the Product on the DIN rail
Additionally required mounting material (not included in the scope of delivery):
☐ Top-hat rail (TH 35-7.5)
Requirement:
☐ The top-hat rail must be securely mounted.
Procedure:
1. Place the product onto the DIN rail from above and
hook it into place.
2
1
enne
xOS
DA
TA MANAGER
☑ The product snaps audibly into place.
2. Ensure that the product is securely in place.