5 Mounting and Installation SMA Solar Technology AG
14 MC-BOX-6_12-BE-en-20 Operating Manual
5.1.2 Mounting the Multicluster Box 6.3 on the Wall
Additionally required mounting material (not included in the scope of delivery):
☐ Four screws suitable for the support surface
☐ Four screw anchors suitable for the support surface and the screws
Procedure:
1. Mark the position of the drill holes.
2. Drill holes (recommended diameter: 6 mm) at the marked position.
8"3/*/(
Danger of crushing or damage to the Multicluster Box
The Multicluster Box can fall down as a result of improper transport and cause severe crushing
injuries.
• Take the weight of the Multicluster Box of approximately 60 kg into account.
To Next Page
Loading...