SMA SUNNY BOY 3800 - Setting the Display Language

Electrical Connection SMA Solar Technology AG
28 SB33_38-IEN111851 Installation Guide
5.4 Setting the Display Language
You can set the language of the display using the switches underneath the display assembly inside
the inverter.
Procedure
1. Open the inverter as described in section 7.2”Opening the Inverter” (page43).
2. Set the switches to the required language, as
shown below.
For type SB 3300-IT/3800-IT inverters the following switch settings apply:
3. Close the inverter as described in section 7.3”Closing the Inverter” (page45).
☑ The display language is set.
Language Switch S2 Switch S1
German B B
English B A
French A B
Spanish A A
Language Switch S2 Switch S1
Italian B A
English A A