SMA Solar Technology AG Decommissioning
Installation Guide SB33_38-IEN111851 65
9. Lift the inverter off the wall mounting bracket.
☑ The inverter is dismantled.
10.2 Packing the Inverter
If possible, always pack the inverter in its original packaging. If it is no longer available, you can also
use an equivalent carton. The box must be capable of being closed completely and made to support
both the weight and the size of the inverter.
10.3 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between − 25 °C and
+60 °C.
10.4 Disposing of the Inverter
Dispose of the inverter at the end of its service life in accordance with the disposal regulations for
electronic waste which apply at the installation location at that time. Alternatively, send it back to
SMA Solar Technology AG with shipping paid by sender, and labeled "ZUR ENTSORGUNG"
("for disposal") (see section 13”Contact” (page73)).
To Next Page
Loading...
