Smallart SM2008FFS Series - User Manual

Temperature Range 5 ~ 35˚ adjustable
Switching Dierential Approx ± 1˚C
Operating Temperature 0~ 45˚C
Operatin Humidity 5~ 90%RH
Storage Temperature -10~ 60˚C
Operating Voltage
AC220V±10% , 50/60 Hz
Switch current rating 1A
Wiring Diameter 0.5 ~1.5 mm²
Hole pitch 60 mm
Dimension 86 ᵡ 86 ᵡ13 mm(HᵡWᵡD)
Technical Data
Package Content
Controller Screw set
Climate Control and Building Automation Systems
PRODUCT DATA AND INSTALLATION GUIDE
SM2008FFS series controllers are stand alone
microprocessor based controllers with LCD
display. It can manage on/o control of the
fans, and 2 or 4 fcu. It has models with options,
backlight, remote controller, and timer.
SM2008FFS Series Fan Coil Controller
Model
2 Pipe
4 Pipe
Back Light Timer Timer(5+2)
Remote Control
SM2008FFS-L
SM2008FFS-TRL
SM2008FFS-T4RL
- - -
-

Smallart SM2008FFS Series Specifications

General

Brand	Smallart
Model	SM2008FFS Series
Category	Controller
Language	English

Summary

Product Information

SM2008 FFS Series Overview

Describes the SM2008FFS series as microprocessor-based controllers with LCD for fan and FCU control, offering various options.

Package Contents

Details the items included in the package, such as the controller unit and necessary screw set.

Technical Data Specifications

Lists key technical specifications like temperature range, operating voltage, humidity, and dimensions.

Installation Guidance

Physical Dimensions

Provides detailed measurements of the controller unit for installation planning.

Wiring Diagrams

Illustrates the terminal connections required for both 4-pipe and 2-pipe system configurations.

Mounting Instructions

Step-by-step guide on how to physically mount the controller unit.

Operation and Scheduling

Basic Operation Controls

Explains the primary functions like ON/OFF, temperature setting, mode selection, and fan speed control.

Clock and Timer Settings

Details procedures for clock calibration and setting timer functions for device operation.

Time Schedule Configuration

Guide for setting up 4-period time schedules for weekdays and weekends.

Advanced System Settings

Controller Configuration Parameters

Lists adjustable parameters for technicians, including fan type, logic, power status, and valve settings.

Sensor Calibration Procedure

Instructions on how to perform sensor calibration for accurate temperature readings.

Low Temperature Protection

Explains the freeze protection feature, its activation, and configuration for heating.