Type 2 EV charging cable
In case of a fixed cable version the cable is supplied in a separate box.
1. 1 x 8 m open-ended to type 2 EV charging cable
2. 1 x cable tie for strain relief
3. 1 x EV cable holder + 2 x screws + 2 x plugs
Identification label
The identification label of your charging station is located on the left inside of the EV Wall.
1. Manufacturer
2. Article number
3. Rating
4. Manufacturing date
5. QR code containing article number and serial number
6. Serial number
7. Degree of protection
8. EAN code
To Next Page
Loading...
