Smappee Infinity - Safety Instructions; Safety warning; Safety precautions; Product identification

3
English – Version 1.2 – January 2021
1. Compatibility
Smappee hardware
EVBox car charging stations are only compatible with Smappee Smart EV charging if one of the
available preconfigured Smart Charging kits is used or when a Smappee Infinity setup with Genius as
gateway is used. In the latter case, Smart Charging Connectors must be purchased separately.
Compatible Smart Charging kits:
Article number
Commercial name
SMARTC-1P50A-2
Smart Charging 1-Phase (50A)
SMARTCPLUS-1P50A-2
Smart Charging Plus 1-Phase (50A)
SMARTC-1P100A-2
Smart Charging 1-Phase (100A)
SMARTCPLUS-1P100A-2
Smart Charging Plus 1-Phase (100A)
SMARTC-3P50A-2
Smart Charging 3-Phase (50A)
SMARTCPLUS-3P50A-2
Smart Charging Plus 3-Phase (50A)
SMARTC-3P100A-2
Smart Charging 3-Phase (100A)
SMARTCPLUS-3P100A-2
Smart Charging Plus 3-Phase (100A)
Smappee Smart Charging kits use a Smappee Connect as gateway, whereas Smappee Smart Charging
Plus kits use a Smappee Genius. All kits are available in a 50A version and a 100A version for the UK
market.
If the Smappee Genius gateway is purchased separately and not as part of a Smart Charging (Plus) kit,
a set of Smart Charging Connectors is required:
IMPORTANT: Smappee Smart EV charging won’t work with a Smappee Connect
unless this gateway is part of a Smart Charging kit.
IMPORTANT: The components in the kit (Power Box, CT hub(s) and Connect or
Genius unit) are pre-configured and are specific to one kit. These components
cannot be used with a different kit.