Need help?Do you have a question about the Smart Life GD11 and is the answer not in the manual?
Explains RED LED states for Wi-Fi configuration and pairing.
Explains GREEN LED states for Wi-Fi connection and network status.
Explains YELLOW LED states for battery sensor pairing status.
Steps for downloading the app, registering, and connecting the controller.
Instructions on how to pair the battery-powered sensor with the controller.
Verify the smart controller works correctly by checking door status in the app.
Guides on wiring the smart controller to the door or gate mechanism.
Configure scheduled tasks and scenes for door operation.
Steps to link the Smart Life app with Amazon Alexa for voice control.
Steps to link the Smart Life app with Google Assistant for voice control.
Share access to the smart controller with other users via the app.
Addresses problems where the door does not open/close via the app.
Solutions for when the controller fails to connect to the Wi-Fi network.
General| Model | GD11 |
|---|---|
| Category | Controller |
| Input Voltage | AC 100-240V |
| Max Load Current | 10A |
| Wireless Protocol | Wi-Fi |
| Compatibility | Smart Life App |
| Operating Temperature | -10°C to 40°C |
To Next Page