-11-
The Smart Lifter is equipped with a manual release
cord to disengage shuttle and move door by hand while
holding the handle down (Fig. 9). To operate pull on the
handle to disengage the shuttle. To re-engage the door
simply run opener in automatic mode or move door by
hand until the trolley engages in the chain shuttle.
For situations where a pedestrian door is not present it is
recommended that an external disengagment device is
tted. (Fig. 10).
Manual Disengagement
Fig. 9
Fig. 10
Important Information for
the User
Once the Smart Lifter opener has been installed, the
user must be informed about how it works and all the
risks that can arise if it is used improperly. The user must
avoid placing himself/herself in dangerous situations such
as standing within the door’s operating range when it is
moving.
Do not let children play near the door and keep the
remote controls out of their reach.
All servicing, repairs or checks must be carried out
by professionally qualied personnel and noted on a
maintenance register kept by the user.
Information for the user is found in the USERS/OWNERS
MANUAL included with this opener.
IMPORTANT: Please make sure the USERS/OWNERS
MANUAL is passed on the the owner prior to leaving the
installation.
IMPORTANT: In the case of a malfunction the user must
call an authorized smart opener Pty Ltd installer and
should not attempt to repair it.
To Next Page
Loading...
