Note: The specific numbers should be preset, just refer to 7.2
7.4
7.4
7.4
7.4 Wire
Wire
Wire
Wire cut-off
cut-off
cut-off
cut-off alarm
alarm
alarm
alarm
When the electricity supply of device is cut off, it will activate cut-off alarm. In
this case, the device will send related SMS to the specific numbers and dial the
numbers in circles. If nobody answers, the call just keeps 3 loops at most. At
the meantime, the device will upload SOS alarm data to the server. And it will
send:
Cut Power ！ < Date Time:11-06-17 14 ： 53 ： 06 > ，
http://maps.google.com/maps?q=N22576713,E113.916585
Note
：
SMS and call alarm function need setting special number s beforehand.
7.5
7.5
7.5
7.5 Low
Low
Low
Low battery
battery
battery
battery alarm
alarm
alarm
alarm
When the device is only working with battery, once the internal voltage of
battery is less than 3.7V, device will send low battery alarm sms to specific
number and alarm on platform.
Low battery alarm sms content example: “ Attention!!!battery too low, please
charge. ” Which means the battery is to low, to inform user charging it in time.
No te : SMS and call alarm function need setting specific numbers beforehand.
7.6
7.6
7.6
7.6 Vibration
Vibration
Vibration
Vibration alarm
alarm
alarm
alarm
When vehicle power is off, ACC status is also low, and if the lead time of low
ACC is more than 10 minutes
（
settable
）
, device will activate security alarm.
When the security alarm is on, once the vehicle vibrates for several times, the
alarm will be activated, in the later 3 minutes, vehicle power is still off
（
ACC
status is low, device will start alarm
）
. At this time, it will send alarm SMS to
SOS specific number, and dial the SOS specific number in cycle until through .
If nobody answers, the call just keeps 3 loops at most. T he tracking platform
will also receive vibration alarm message.
e.g.: Sensor Alarm
！
< Date Time:11-06-17 14
：
53
：
06 >
，
http://maps.google.com/maps?q=N22576713,E113.916585
Note: SMS and call alarm function need setting special number beforehand.
SMS “ SENSOR,0#
SENSOR,0#
SENSOR,0#
SENSOR,0# ” to turn off vibration alarm.
7.7
7.7
7.7
7.7 Voice
Voice
Voice
Voice monitoring
monitoring
monitoring
monitoring
When the special number cellphone dial device, ringing for 10 seconds, it will
enter voice monitoring status. At this time, caller can monitoring the sound in
To Next Page
Loading...