EasyManuals Logo

SMART 453 2016 User Manual

SMART 453 2016
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
X
Release the brake pedal.
X
Release the parking brake.
X
Switch on the hazard warning lights.
Vehicles with manual transmission:
X
Leave the key in position 2 in the ignition
lock.
X
Release the brake pedal.
X
Release the parking brake.
X
Switch on the hazard warning lights.
Towing the vehicle with the rear axle
raised
X
Switch on the hazard warning lights.
X
Deactivate automatic door locking.
X
Turn the front wheels to the straight-
ahead position.
X
Vehicles with automatic transmission: turn
the key to position 2 in the ignition lock.
X
Vehicles with automatic transmission: shift
the transmission to position P.
X
Vehicles with manual transmission:
depress the clutch pedal fully and select
neutral.
X
Turn the key to position 0 in the ignition
lock and remove it.
Transporting the vehicle
!
Only lash
the vehicle down by the wheels
or wheel rims, not by parts of the vehicle
such as axle or steering components. The
vehicle could otherwise be damaged.
X
Vehicles with automatic transmission: turn
the key to position 2 in the ignition lock.
Move the transmission to position N.
X
Vehicles with manual transmission:
depress the clutch pedal fully and select
neutral.
As soon as the vehicle is loaded:
X
Apply the parking brake.
X
Vehicles
with automatic transmission: shift
the transmission to position P.
X
Vehicles with manual transmission: engage
first gear.
X
Remove the key.
X
Lash down the vehicle.
Emergency engine starting by tow
starting
The following
conditions must be met before
tow starting:
R
The battery is connected.
R
The engine has cooled down.
R
The exhaust system has cooled down.
X
Switch on the hazard warning lights.
X
Fit the towing eye.
X
Attach the tow bar or tow rope.
X
Depress the brake pedal and keep it
depressed.
X
Turn the key to position 2 in the ignition
lock.
X
Vehicles with automatic transmission:
activate the manual gearshift setting.
X
Vehicles with manual transmission:
depress the
clutch pedal fully, engage sec-
ond gear and keep the clutch pedal fully
depressed.
X
Release the brake pedal.
X
Tow start the vehicle.
X
Vehicles with automatic transmission:
push the selector lever forwards towards
q until the engine starts. Do not depress
the accelerator pedal while doing so.
X
Vehicles with manual transmission: with-
out depressing the accelerator pedal,
release the clutch pedal slowly.
X
Vehicles with manual transmission: when
the engine
is started, immediately depress
the clutch pedal fully and select neutral.
X
Keep the engine running by accelerating.
X
Pull over at a suitable place and stop the
vehicle safely, paying attention to road
and traffic conditions.
X
Apply the parking brake.
X
Remove the tow bar or tow rope.
X
Remove the towing eye.
Removing the towing eye
X
Loosen the towing eye and unscrew it.
X
Attach the cover to the recess at the top
and engage it at the bottom.
X
Stow the towing eye in the vehicle tool
tray.
Towing and tow-starting the vehicle
157
>> Dealing with accidents and breakdowns.
Z

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMART 453 2016 and is the answer not in the manual?

SMART 453 2016 Specifications

General IconGeneral
BrandSMART
Model453 2016
CategoryAutomobile
LanguageEnglish

Related product manuals