ashtray is fully inserted in the cup holder.
Make sure
that lit cigarettes do not fall into
the cup holder.
Otherwise, the cup holder could be dam-
aged.
X
To open: lift up cover :.
X
To close: push down cover :.
X
To remove: pull the ashtray up and out.
X
To insert: insert the ashtray into the cup
holder.
Using the 12 V socket
X
Turn the key in the ignition lock to position
1.
X
Lift up the cover of socket :.
X
Connect device.
The socket can be used for accessories up to a
maximum draw of 120 W
(15 A).
If you use the socket for very long periods
when the engine is switched off, the 12 V
battery may discharge.
Fitting and removing the floormats
G
WARNING
Objects in the driver's footwell may
restrict the
clearance around the pedals or
block a depressed pedal. This jeopardises
the operating and road safety of the vehi-
cle. There is a risk of an accident.
Stow all objects securely in the vehicle so
that they do not get into the driver's foot-
well. Always fit the floormats securely and
as prescribed in order to ensure that there
is always sufficient room for the pedals. Do
not use loose floormats and do not place
several floormats on top of one another.
X
Slide the driver's seat backwards.
X
To install: press securing knobs : onto
retainers ;.
X
To remove: release securing knobs : from
retainers ;.
84
Using the accessories
>> Feeling comfortable in the vehicle interior.
To Next Page
Loading...
Need help?
General
