Using multitouch gestures
Page 3 of 4
Using touch gestures
Drag
Move your fingertip over the interactive surface
without losing contact.
Flick
Quickly brush the interactive surface with
your fingertip.
To enable gestures
1. Open the SMART Control Panel from the Windows
®
notification area
2. Press SMART Hardware Settings. The upper area of the Control Panel displays an image of the SMART product
connected to the computer.
3. Press the image of the product whose settings you want to change
4. Select Mouse and Gesture Settings from the list
5. Select Enable Single-Touch Gestures
6. If you haven’t done so already, select Multitouch Mode
7. Press OK to close the Control Panel
To Next Page
Loading...
