Helpful hints 10!21
Tyres and wheels
Changing a wheel
Accident risk!
Exceeding the quoted tyre load
capacity and the permissible speed
limit can result in tyre damage or tyre
failure. You could lose control over
your vehicle and cause an accident,
injuring yourself or others as a result.
For this reason, use only the tyre types,
tyre sizes and wheel sizes that are
approved for your type of vehicle.
Please note in particular the customer!
specific approval regulations for
tyres.
These regulations may specify the use
of a particular tyre type for your car, or
prohibit the use of certain tyre types
that are permitted in other countries.
The use of a particular type of tyre may
moreover be recommended for certain
regions and areas of use.
Information on tyres is available from
a qualified specialist workshop, e.g. a
smart center.
Accident risk!
Have the tightening torque
checked by a qualified specialist
workshop after changing a wheel. smart
gmbh recommends that you visit a smart
center for this. It is particularly
important to have safety!relevant work
and work on safety!relevant systems
performed by a qualified specialist
workshop. The wheels could otherwise
work loose if they are not tightened to
a torque of 120 Nm. For safety reasons,
use only the correct wheel studs
approved by smart gmbh.
!"#$%&'()*$#+,,-#.#/01,,2034567(809:;<%%=##>*7)*#-?##@%4)&5A#-1;#B=)%<*$#-,,C##??DC?#??
To Next Page
Loading...
