EasyManua.ls Logo

Smartech JSL-1250 - FUSE REPLACEMENT; Replacing 12 V DC Fuses

Smartech JSL-1250
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER’S MANUAL PAGE 9JSL-1250
NOTE: Actual time may vary. Times are based on the internal battery being fully
charged.
SUPPLY 12V
DEVICES
ESTIMATED
WATTAGE
ESTIMATED
RUN TIME
Electric cooler 48 watts 4.5 hrs.
Car vacuums,
Air compressors
80 watts 2.7 hrs.
If you have to replace 12V DC power fuse, follow these instructions.
Step 1: Use screwdriver to take the screws out. Remove the rubber bottom
panel rst. Then remove the rear panel.
WARNING: Unplug AC charging adaptor from Portable Power unit before
attempting to replace fuse.
Step 2: You will nd the fuse boxes shown below.
FUSE REPLACEMENT

Related product manuals