Smartech WBC-200 - Charger Operating Steps; Step-by-Step Charging Process

USER’S MANUAL PAGE 15WBC-200
Step no. Determine whether or
not to connect
Step select key
Step 1
Correctly connect
the charger to the
battery
/ /
Step 2
Conrm battery type
Ensure battery
connection
Step 3
Determine RATE
SELECTION
Ensure battery
connection
BATTERY
TYPE
12V 200A
6V/12V AGM
6V/12V GEL
6V/12V STD
OPERATING STEPS
Note: When the digital screen is only displayed as OFF, the charger can
choose the corresponding mode by pressing RATE SELECTION button.
RATE SELECTION
ENGINE START
12V 200A
12V AGM
CHARGE / M AINTAIN
6A < > 2A
40A BOOST