USER’S MANUAL PAGE 4WBC-200
10. Any repair must be carried out by the manufacturer or an authorized
repair agent in order to avoid danger.
GROUNDING AND AC POWER CORD CONNECTIONS
This battery charger is for use on a nominal 120 volt circuit. The plug must
be plugged into an outlet that is properly installed and grounded in accor-
dance with all local codes and ordinances. The plug pins must t the recep-
tacle (outlet). Do not use with an ungrounded system. Use of an adapter
plug is not recommended; an adaptor plug should not be used.
USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an
extension cord, follow these guidelines:
1. Pins sockets on the extension cord plug must be the same number,
size, and shape as those of plug on charger.
2. Ensure that the extension cord is properly wired and in good electrical
condition.
3. Wire size must be large enough for the AC ampere rating of the charger,
as specied on the next page:
WARNING: This Product contains chemicals including SCCP, PAHs,
DBP, DEHP, BBP, DBP, DIBP which are known to the State of
California to cause cancer, birth defects or other reproductive harm.
For more information, go to - www.P65Warning.ca.gov
Wash hands after handling.
To Next Page
Loading...