SmartFLeX SF500 - Bed Assembly Instructions; Step 1: Unpack and Lay Flat; Step 2: Unfold Base and Remove Parts; Step 3: Prepare Components

06
1.
Remove the bed from the packaging by cutting the
taped edges of the box. After removing the bed
from the box and the plastic wrap around it, lay the
bed at.
2.
After laying at unfold the base. This will expose the
remote, packaged leg box and mattress guards.
Remove the remote, packaged leg box and foot
guards by cutting their zip ties.
3.
After cutting the zip ties, remove the remote, legs
and mattress guards from their boxes and
packaging.
Bed Assembly
USER MANUAL: SF500