Smartgen HGM6110 User Manual

HGM6110/6120
Automatic Generator Module
OPERATING MANUAL
Smartgen Electronics

Smartgen HGM6110 Specifications

General

Brand	Smartgen
Model	HGM6110
Category	Control Unit
Language	English

Summary

OPERATION

Key Functions and Mode Selection

Automatic Operation Sequence

Details the step-by-step process for automatic start and operation.

Manual Operation Sequence

Outlines the sequence of operations for manual start and operation.

PROTECTION AND ALARMS

Warning Conditions Overview

Shutdown Alarms and Causes

Details critical shutdown conditions that stop the generator operation.

CONNECTING TERMINALS

Power, Relay, and Magnetic Pickup Connections

Sensor, Auxiliary, and Remote Start Inputs

PARAMETER DEFINITIONS

Mains, Timing, and Engine Speed Parameters

Lists parameters for mains voltage, timing, engine speed, and frequency.

Generator Voltage, Frequency, and Protection Parameters

Lists parameters for generator voltage, frequency, temperature, and oil pressure.

Current, Control, and Input Settings

Details parameters for current protection, output control, and digit inputs.

Output Relays and Digital Inputs

Sensor Configuration and Crank Success

SETTING PARAMETERS

Accessing and Adjusting Parameters

Guides users on entering settings, using passwords, and adjusting values.

TEST RUN PROCEDURES

Pre-Operation Checks and Manual Testing

Automatic Mode Testing and Verification

TYPICAL WIRING DIAGRAMS

HGM6110 Wiring Diagram

HGM6120 Wiring Diagram

FAULT FINDING AND TROUBLESHOOTING

Unit and Sensor Fault Diagnosis

Addresses common unit inoperative, shutdown, and sensor-related faults.

Engine and Operation Fault Diagnosis

Covers faults related to engine starting, operation, and generator loading.