Sensitivity control：Adjust the detector range of Passive
Infrared Motion Sensor ( 6.56ft ~ 32.8ft)
Selecting working mode:
Mode 1: Suggested setting when out of town
- Light + camera + speaker: all day detection
- Daytime and nighttime: light, camera and speaker are all in
operation
Mode 2: Suggested for day to day use
- Light at night + camera all day + speaker in the daytime
- Daytime: light is off, camera is on, speaker is on
- Nighttime: light is on, camera is on, speaker is off
Mode 3: Perfect for a place of business
- Light at night + camera all day + speaker at night
- Daytime: light is off, camera is on, speaker is off
- Nighttime: light is on, camera is on, speaker is on
Audio mode: for selecting which audio message will play
when motion sensor detects movement.
- Pre-set default is “You are trespassing”
- Push one time for “Warning! You are being videotaped by a
security camera”
- Push again for “dog barking”
- Push one more time to turn off this function
LED indicator：for indicating the function status of the unit
by different color LED lights.
1) Red： memory card (part no.②) is not inserted into the
memory slot or the system is malfunctioning. Please turn
off and on the main power supply to the unit if the system is
malfunctioning.
2) Green： The unit is recording or USB is inserted
3) LED off: stand by (memory card is inserted into the slot）,
when off/record button is pressed
4) Flash green LED：memory card is full
* Usually meory card has override function, but if the user
To Next Page
Loading...