doesn’t reset the date/time after power failure, the setting will
return to default and lead to limited space for saving files.
* Backup power for reserving date/time setting for at least 1 to
3 days during power outage.
* Please note when off/record button is pressed, remove
memory card (part no.②) within 30 seconds (now the LED will
turn red after memory card is removed from the slot)
Reset button： restore functions to default settings
1) Press RESET button once each time you turn on unit.
2) Please press this button in case of system malfunction.
Off/Rec：Please press OFF/REC button to remove meory card
(part no.②). Please remove card within 30 seconds of pressing
the OFF/REC button to avoid loss of data.
Step 4. Set the Date and Time
：
This will allow the security video taken by Smartguard to display the
correct date and time it was taken.
1. Push TIME/DATE SET button (see fig. 12) for 3
seconds. The LCD screen will then flash 3 times,
indicating you have entered Time/Date setting
mode.
2. “YEAR”setting：”Y” and “10” are displayed on
the screen; push the button to set year from “10-
99”, push the button again and hold for 3 seconds
To Next Page
Loading...