Why is the LCD display blank on my smartheart Scales when powered on?
If your smartheart Scales display is blank when you turn it on, it could be due to several reasons. First, ensure that three AAA batteries are properly installed, paying attention to the correct polarity. If batteries are already installed, verify their polarity. If the issue persists, try replacing the old batteries with a new set.
What to do if smartheart 19-103 activate but shut off immediately?
If your smartheart Scales turn on but then immediately shut off, the batteries may be low. Replace the batteries with new, unused ones.
How to resolve overload issue on smartheart Scales?
If you see an overload message or the unit shuts off, it indicates that the weight on the smartheart Scales exceeds its capacity of 199 kg / 438.7 lbs. Stop using the scale immediately, as it is not designed for weights beyond this limit.
General| Auto Power Off | Yes |
|---|---|
| Unit Switchable | Yes |
| Material | Tempered Glass |
| Weight Capacity | 180 kg |
| Units | lb/kg/st |
| Maximum Weight Capacity | 180 kg |
| Graduation | 0.1 kg |
| Power Source | AAA batteries |
Consolidates safety, general, operating, storage, and cleaning warnings for proper use.
Provides tips for accurate weight measurement, such as weighing before eating and on a flat surface.
Step-by-step guide on how to use the scale for weight measurement.
To Next Page
