What to do if my smartheart Scales LCD display is blank?
If your smartheart Scales' LCD display is blank when you turn it on, it could be due to a few reasons. First, make sure that 2 CR2032 batteries are correctly installed, paying attention to the polarity. If batteries are already installed, verify their polarity. If the battery is depleted, try installing a new battery.
Why do my smartheart 19-106 Scales turn on and then immediately turn off?
If your smartheart Scales turn on but then shut off right away, it's likely because the batteries are low. Try replacing the batteries with new, unused ones.
What to do if my smartheart 19-106 Scales say overload and shut off?
If you see an overload message or the smartheart Scales shut off when you put something on them, it means you're exceeding the maximum weight capacity. This scale is designed for items weighing no more than 5000g / 11 lbs. Stop using the scale with the current item.
How to fix a low battery on smartheart 19-106?
If your smartheart Scales are showing a low battery warning, you should replace the batteries with new, unused ones.
General warnings regarding scale handling, damage, repair, and disposal procedures.
Precautions for using the scale within specified environmental temperature and humidity ranges.
Guidelines for storing the scale to prevent damage and ensure optimal functionality.
Instructions on how to clean the scale without causing damage or voiding warranty.
Steps for installing and replacing the CR2032 batteries in the digital scale.
Guide on how to measure the weight of individual items directly on the scale.
Instructions for using the tare function to accurately weigh food in a container.
How to use the scale to estimate calorie and carbohydrate content for selected foods.
General| Auto Power Off | Yes |
|---|---|
| Material | Tempered Glass |
| Maximum Weight Capacity | 180 kg |
| Unit Switchable | Yes (lb/kg/st) |
| Dimensions | 30 x 30 x 2.5 cm |
To Next Page
