Average Speed, Max Speed
Click to change between displaying range,
average speed and max speed.
Setup
Press and hold for 2 seconds to enter the
setup menu.
Touch to select the menu.
Use and to change the value.
Touch again to choose the “Save & Exit” option
to finish the setup.
7. LCD Display Panel Controls
Sleep Mode
If the bike remains stationary for 10 minutes, the
LCD automatically powers down.
Error Code Display
If there is something wrong with the electronic
control system, the display will show the error code
automatically. Should you receive an error code,
contact your local dealer for advice.
Before contacting service center check all plugs for
loose connections.
01 POWER OVERLOAD Rest Bike, try again
06 LOW VOLTAGE Charge Battery
07 OVER VOLTAGE Wrong battery
08 HALL SENSOR Check motor cable
09 MOTOR PROBLEM Check motor cable
10 CONTROLLER OVERHEAT Rest 10 min
11 TEMPERATURE SENSOR Contact service
12 CURRENT SENSOR Contact service
21 SPEED SENSOR Contact service
22 BMS PROBLEM Contact service
30 CONTOLLER PROBLEM Check all plugs
SET
SET
SET
SET
Sonic user manual.indd 17 9/4/2017 3:50:57 PM
To Next Page
Loading...
