C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 253
2. From the MISCELLANEOUS menu, scroll and select Direct Change Delay.
Figure 458: MISCELLANEOUS Menu – Direct Change Delay
3. From the DIRECT CHANGE DELAY menu, set the delay time for the car to change
directions.
Figure 459: DIRECT CHANGE DELAY Menu
4. Scroll right and press Save.
29.17 Default
The default settings are the original settings within the controller.
29.17.1 Default Floors
The user has the option to restore the original learned floors.
The following procedure describes how to select default floors.
1. Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 58.
2. From the MISCELLANEOUS menu, scroll and select Default.
Figure 460: MISCELLANEOUS Menu – Default
3. From the DEFAULT menu, scroll and select Default Floors.
Figure 461: DEFAULT Menu – Default Floors
To Next Page
Loading...
Need help?
General
