Smartrise SRU - User Manual

Smartrise SRU Specifications

General

Controller Type	Elevator Controller
Model	SRU
Microprocessor	32-bit
Communication Protocol	CANbus
Inspection Operation	Standard
Frequency	50/60 Hz
Phase	3-Phase
Control Method	Variable Voltage Variable Frequency (VVVF)
Enclosure Rating	NEMA 1
Operating Temperature	0°C

Summary

Replacing and Programming a SRU Board

Access Code

Explains the access code required for initial SRU board power-up.

SRU Board Revision Layouts

Diagram illustrating the component layout for Revision 5-7 SRU boards.

Tips to Preserve Settings During Board Replacement

Methods to save job settings when replacing a failed MR SRU board.

USB Debug Adapter

Replace Functioning MR SRU Board

Procedure for replacing a working MR SRU board with a newer revision while retaining settings.

Replace a Non-Functioning MR SRU Without Losing Settings

Software Extraction to Laptop

Download Zip File

Instructions for downloading the software zip file from a provided link.

Installing the Smartrise Programmer

Step-by-step guide to install the Smartrise Programmer application.

Installing the Controller Software

Procedure to install the controller software after the programmer is installed.

Software Provided by Flash Drive

Installing the SRU Software

Programming a New MR Controller

Guide to program a new Machine Room (MR) controller using the Smartrise programmer.

Programming CT;COP Controller

Steps for programming Cartop (CT) and Car Operating Panel (COP) controllers.

Programming Group Controller for Non-Simplex Jobs

Procedure for programming group controllers in non-simplex job configurations.