Smartwares CMS-30100 - 6.2.5 Camera Audio Enable; 6.2.6 Volume setup

System operation | 6
CMS-30100_IM 13
Illustration17: Wifi Channel
Illustration18: Channel List
6.2.5 Camera Audio Enable
Illustration19: Camera Audio En-
able
Illustration20: Enable - Disable
camera audio
The camera microphone can be enabled or disabled from this menu. It is important to
note that if the camera microphone is disabled, 2-way communication with the camera
is no longer possible.
a) From the main menu: Select “System Setup”.
b) Select “Camera Audio Enable”.
c) Select the relevant camera and pull the slider to the on or off position.
6.2.6 Volume setup
Illustration21: Volume setup
The volume setup allows the volume of the monitor to be increased or decreased.
a) From the main menu: Select “System Setup”.
b) Select “Volume Setup”.
c) Set the volume by selecting a numbered volume value (0-4). Setting the value to 0
will mute the monitor speakers completely.