Installation | 3
CMS-30100_IM 7
d) Insert the plugs.
e) Drill a sufficiently sized hole to pull the cables.
f) Pull the required cables through the hole.
g) Mount the included antenna onto the camera.
h) Fasten the camera with the screws.
In case that you wish to run the cable on the outside of the wall, a weatherproof con-
nection box is required.
3.2.2 Wiring
The camera is wireless and only requires an electrical connection.
Things to consider when wiring the camera:
– The cable connection must be done indoors or inside a weather proof connection
box, mounted on the outside.
– The hole should be sealed with filler to avoid water ingress.
– It is recommended to pull all cables through the hole. The re-set button can be left
outside but it is not recommended.
To Next Page
Loading...
