Smartwares CMS-30100 - 6.6.2 Factory Setting; 6.6.3 Upgrade; 6.6.4 IPC Upgrade

System operation | 6
CMS-30100_IM 17
6.6.2 Factory Setting
Illustration34: Factory Setting
This menu allows the user to restore the factory settings at two levels.
– “Simple Restore” will reset all settings except your paired cameras and Wifi set-
tings.
– “Restore All” will reset all settings including your paired cameras and Wifi settings.
– To restore your system, do the procedure below.
a) From the main menu: Select “System Manage”.
b) Select “Factory Setting”.
c) Select “Simple Restore” or “Restore All”.
6.6.3 Upgrade
The “Upgrade” menu allows the user to update the monitor firmware using a MicroSD
card. This is not recommended and is mainly used when required by support.
6.6.4 IPC Upgrade
The “IPC Upgrade” menu allows the user to update the camera firmware using a Mi-
croSD card. This is not recommended and is mainly used when required by support.