Smartwares SHS-51001-EU - Assembling of the Magnet Contact; Changing Batteries of a Magnetic Contact; Technical Specifications; Warranty

Installation instructions – wireless door activated light switch 27
Technical specications
Switch
Power supply 230 V
Max capacity 3600 W
Frequency 433 Mhz RF
Remote control
Location: Inside
Width: 35 mm
Mains voltage: 12 V/DC
Channels: 4
Power Supply: Operates on batteries
Height: 123 mm
Frequency: 433 MHz
Depth: 18 mm
Max. range: 50 m
Category: Wireless remote control
Battery
Remote 12V DC
Warranty
This device has a limited two-year warranty. For the guarantee conditions go to:
www.smartwares.eu.
3. One scene
With a scene, you can group multiple lamps. Thus, you can, as an example,
switch on or off all lamps at once. It is also possible to provide scenes with
switches to the wall, so that with one click for example all lights go out.
Go to www.homewizard.nl for more explanations on the above functions.
Assembling of the magnet contact
Attach the contact sensor to the desired place.
Attach the magnetic component part (narrow
part) to the moving part of a door or a window.
NOTE! The arrow of the magnetic component
part must point to the arrow of the transmitter
and be aligned.
Changing batteries of a
magnetic contact
1. Slide the battery holder from the contact
sensor.
2. Insert a new battery. Make sure that the
+ pole of the battery is on top.
10 mm
1
2
26 Installation instructions – wireless door activated light switch