SmartWatcher VITA - First-Time Use; Charge your watch; Register and activate your watch online

FR
EN
DE
NL
IT
6
2. FIRST-TIME USE
Step 1 - Charge your watch
Your watch should be fully charged before you start using it.
1. Insert the wide end of the charging cable (6) into the USB
power adapter (5) and the narrow end into the round
charging cradle (7). Now insert the plug into a socket.
2. Place the watch on the magnetic charging cradle. It takes
about 2 hours until the watch is fully charged.
Step 2 - Register and activate your watch online
1. The watch will start automatically when placed on the
charging cradle. This may take several seconds.
2. You are now prompted to select your language. Swipe your
nger gently upwards until you nd the language you want.
3. Conrm your choice by tapping the green tick with your
nger. The message “Not yet activated” will now appear on
the screen.