Need help?Do you have a question about the SMARTWINGS INS-C035 and is the answer not in the manual?
Select the desired channel on the remote for pairing operations.
Procedure to connect the remote control to the motor unit.
Reverse motor direction using OPEN and CLOSE buttons simultaneously.
Reverse motor direction by holding the motor button and pressing CLOSE.
Set the upper limit position by pressing the OPEN button.
Set the lower limit position by pressing the CLOSE button.
Save a custom intermediate shade position using the STOP button.
Remove a previously saved favorite shade position.
Modify the upper limit by pressing OPEN & STOP.
Modify the lower limit by pressing CLOSE & STOP.
Choose a channel on the existing remote to copy settings.
Procedure to add or remove new remote controls.
Configure for double button pushbutton switch operation (factory default).
Configure for mechanical switch operation.
Configure for electronic switch operation.
Configure for single channel pushbutton switch operation.
Adjust the motor speed to a higher setting.
Adjust the motor speed to a lower setting.
This document outlines the remote programming guide for SMARTWINGS devices, focusing on the setup, operation, and maintenance of their battery motors and associated remote controls. The guide emphasizes safety instructions, ensuring users understand how to operate and maintain the device responsibly.
The core function of the device involves controlling window shades or similar applications using a remote control. Each battery motor is pre-programmed at the factory, meaning the remote is already paired with the motor, and the upper and lower operational limits are set, with the remote unlocked for immediate use. This pre-configuration simplifies the initial setup process for users.
The SMARTWINGS system allows for remote control of motorized shades, offering precise control over their movement. Users can open, close, and stop the shades at any desired position. A key feature is the ability to set "favorite positions," which are custom stopping points between the fully open and fully closed limits. This provides convenience for users who frequently use specific intermediate positions for their shades. The system also supports adjusting the upper and lower operational limits, allowing for fine-tuning of the shade's travel range to fit specific window dimensions or user preferences.
Another functional aspect is the ability to switch the motor's rotating direction, which is particularly useful during initial setup or after a motor reset to ensure the "open" and "close" buttons correspond correctly to the shade's movement. The system also supports pairing additional remote controls (emitters) or unpairing existing ones, offering flexibility in controlling multiple shades or providing multiple control points for a single shade.
For enhanced control, the device offers "weak-current switch modes," which are optional configurations for different types of external switches. These modes include double button pushbutton switch mode, mechanical switch mode, electronic switch mode, and single channel pushbutton switch mode. These options cater to various installation requirements and user preferences for physical control interfaces beyond the standard remote.
A unique feature is the "Run/Stop by Pulling Fabric" function, which allows users to manually open or close the shades by gently pulling the fabric. This provides an intuitive physical override or alternative control method, especially useful if the remote is not immediately accessible.
The system also includes speed regulation, enabling users to adjust the motor's operating speed. This can be useful for achieving a desired aesthetic effect or for accommodating specific environmental conditions.
The remote control is designed for ease of use, featuring push-button controls and an LED display for clear feedback. It also includes a function to hide unused channels, streamlining the interface for users with fewer shades. The remote comes with a wall mount holder, allowing for convenient storage and accessibility.
Initial setup involves selecting a channel on the remote and then activating the pairing mode on the motor. The process is guided by visual and auditory cues from the motor, such as flashes and beeps, indicating successful pairing or mode activation. Setting open and close limits involves driving the shade to the desired positions and confirming them with the remote, again with clear feedback from the motor.
Favorite positions are set by moving the shade to the desired intermediate point and then using a specific sequence on the remote. Deleting these positions follows a similar, straightforward process. Adjusting existing limits also involves a specific sequence to unlock the remote for limit setting, ensuring that limits are not accidentally altered during normal operation.
Pairing or unpairing additional remotes is achieved by copying settings from an existing remote to a new one, simplifying the expansion of the control system. The weak-current switch modes offer advanced configuration options for integrating the motor with various external switches, providing flexibility for custom installations.
The "Run/Stop by Pulling Fabric" feature is enabled by default and provides a convenient manual control option. Speed regulation is accessed by removing the battery cover of the remote and pressing a specific button, allowing users to fine-tune the motor's speed.
The guide provides clear instructions for cleaning the device. It recommends using a damp, soft, lint-free cloth and avoiding moisture in openings, as well as refraining from using aerosol sprays, solvents, alcohol, or abrasives. This ensures the longevity and proper functioning of the device's external components.
For safety, the drive must be disconnected from its power source during cleaning or maintenance. The guide explicitly states that users should not attempt to perform repairs themselves, open the device, or disassemble it, as this voids the warranty and poses a risk of electric shock. It also notes that there are no user-serviceable parts inside.
The device includes a factory reset option, which allows users to revert the motor to its original settings, deleting all stored limits and remote pairings. This is useful for troubleshooting or for reconfiguring the system from scratch. The reset process involves holding a specific button on the motor head for a duration, with visual and auditory feedback confirming the reset. After a factory reset, users are directed back to the initial setup programming section to re-pair the remote and set new limits.
Overall, the SMARTWINGS system is designed for user-friendly operation and maintenance, with clear instructions and safety guidelines to ensure a reliable and enjoyable experience.
General| Category | Window Blinds |
|---|---|
| Model Number | INS-C035 |
| Brand | SMARTWINGS |
| Mounting Type | Inside Mount, Outside Mount |
| Adjustable Slats | Yes |
| Color Options | White, Gray, Beige |
| Light Filtering | Light Filtering |
| Privacy | Privacy |
To Next Page