Doc. no. AMX-OMU0058-C
-6-
Caution
Model selection
Although it depends on the types or specifications of the compressor, compressed air
generally contains particle contaminants. Please select the system construction in
reference to the model selection of air preparation equipment in accordance with the user
required cleanliness of the compressed air or applications.
【Contaminants contained in the compressed air】
- Moisture (water droplet, water vapor)
- Dust and chemicals which are sucked from the ambient air.
- Deteriorated oils coming out of the compressor (including deteriorated oil)
- Solid foreign matter or oils including rust in the piping.
・
Select the model so that the maximum value (instantaneous) of the flow rate will not
exceed the rated air capacity.
When compressed air is used for air blow, calculate the maximum amount of the
consumed air before selecting the size. If compressed air exceeding the rated air flow
capacity is applied, the outlet compressed air cleanliness might be reduced or oil mist on
the outlet side may leak out, which may damage the element.
・
Do not use the product with low air pressure (e.g. for blower).
If it is used at the minimum operating pressure or less, pressure resistance or increase in
pressure resistance due to clogging may reduce the performance or cause operation
failure.
To Next Page
Loading...
