Figure 1.2
❍ Note that you are given the option of choosing between four keys. The
keys are displayed as Key 1, Key 2, Key 3, and Key 4. Normally, Key 1 is
recommended. However, you can also enter keys under Key 2, 3, and/or 4.
Once the same key is configured for Key 2, 3, or 4 of your wireless card, the
wireless connection will be established.
Figure 1.3
❍ Also note that the WEP protects data transmitted between wireless
nodes, but it does not secure any transmissions over your wired network or
over the Internet.
To Next Page
Loading...
