SMC Networks EX600-ED Series User Manual

-24-
No. DOC1045423
•PWR-LED
LED display
Content
Green ON
The power supply voltage for control and input is correct.
Red ON
The power supply voltage for control and input is below 19 VDC.
(When diagnostic parameter is enabled)
•PWR(V)-LED
LED display
Content
OFF
The power supply voltage for output is below 19 VDC.
(When diagnostic parameter is disabled)
Green ON
The power supply for output is correct.
Red ON
The power supply voltage for output is below 19 VDC.
(When diagnostic parameter is enabled)
•RUN-LED
LED display
Content
OFF
INIT state
Green blinking
PRE-OPERATIONAL state
Green single flashing
SAFE-OPERATIONAL state
Green flickering
BOOTSTRAP state
Green ON
OPERATIONAL state
Red ON
SI unit has failed.
•ERR-LED
LED display
Content
OFF
No communication errors
Red blinking
Invalid configuration
Red single flashing
Synchronization error, communication data error
Red double flashing
Communication error (Application watchdog timeout)
Red ON
SI unit has failed.
: RUN LED and ERR LED Flashing pattern
Flickering
Blinking
Single flashing
Double
flashing
ON
OFF
50ms
ON
OFF
0.2s
0.2s
ON
OFF
0.2s
1s
ON
OFF
0.2s
0.2s
0.2s
1s

SMC Networks EX600-ED Series Specifications

General

Brand	SMC Networks
Model	EX600-ED Series
Category	Industrial Equipment
Language	English