C
OMPLIANCES
AND
S
AFETY
S
TATEMENTS
– 6 –
CE MARK DECLARATION OF CONFORMANCE FOR EMI AND SAFETY (EEC)
SMC contact for these products in Europe is:
SMC Networks Europe,
C/Fructuós Gelabert 6-8, 2
o
, 2
a
,
Edificio Conata II,
08970 - Sant Joan Despí, Barcelona, Spain.
This information technology equipment complies with the requirements of the
Council Directive 89/336/EEC on the Approximation of the laws of the Member
States relating to Electromagnetic Compatibility and 73/23/EEC for electrical
equipment used within certain voltage limits and the Amendment Directive 93/
68/EEC. For the evaluation of the compliance with these Directives, the following
standards were applied:
RFI Emission:
◆ Limit according to EN 55022:2010 AS/NZS CISPR 22:2009, Class A
◆ Limit for harmonic current emission according to EN 61000-3-
2:2006+A1:2009+A2:2009
◆ Limitation of voltage fluctuation and flicker in low-voltage supply
system according to EN 61000-3-3:2008
Immunity:
◆ Product family standard according to EN 55024:2010
◆ Electrostatic Discharge according to IEC 61000-4-2:2008
◆ Radio-frequency electromagnetic field according to IEC 61000-4-
3:2006+A1:2007+A2:2010
◆ Electrical fast trsnsient/burst according to IEC 61000-4-4:2010
◆ Surge immunity test according to IEC 61000-4-5:2005
◆ Immunity to conducted disturbances, Induced by radio-frequency
fields:IEC 61000-4-6:2008
◆ Power frequency magnetic field immunity test according to IEC
61000-4-8:2009
◆ Voltage dips, short interruptions and voltage variations immunity test
according to IEC 61000-4-11:2004
LVD:
◆ EN60950-1:2006+A11:2009+A1:2010
To Next Page
Loading...
Need help?
General