SMC Networks ISE20B - Page 32

-31-
No.PS※※-OMV0006-D
∗: IO-Link mode can provide the communication function.
∗: Refer to page 63 for details of the diagnostic information.
Press the button to set. Return to function selection mode.
[F 0] Display units, switch output specifications and diagnostic information selection function completed
●Available display unit and minimum set value
Unit
ZSE20BF
ZSE20B
ISE20B
MPa
0.001
0.001
0.001
kPa
0.1
0.1
1
kgf/cm
2
0.001
0.001
0.01
bar
0.001
0.001
0.01
psi
0.02
0.01
0.1
InHg
0.1
0.1
-
mmHg
1
1
-
Setting of diagnostic information selection
It is possible to set the condition in which the diagnostic information
of the process data can be transferred to the upper devices such as
a master.