Need help?Do you have a question about the SMC Networks ISE35 and is the answer not in the manual?
General| Brand | SMC Networks |
|---|---|
| Model | ISE35 |
| Category | Switch |
| Language | English |
Explains hazard levels indicated by Caution, Warning, and Danger labels.
Emphasizes responsibility for product compatibility and the need for trained personnel.
Outlines safety considerations for operating in hazardous environments or specific applications.
Defines who can operate and maintain equipment and stresses manual understanding.
Lists critical warnings like not disassembling, operating outside specs, or using in hazardous atmospheres.
Warns against touching terminals during power-on and emphasizes post-maintenance checks.
Provides notes on power supply, UL approval, fluids, voltage, and operating pressure.
Details safe handling, installation torque, and preventing foreign matter entry.
Covers wiring best practices and environmental factors like corrosive gases and direct sunlight.
Addresses lightning surge resistance, fluid/ambient temperatures, and heat radiation.
Provides guidelines for adjustment, operation, and regular maintenance.
Details the warranty period, conditions, and disclaimers for product use.
States prohibitions on using products for WMD manufacturing and export regulations.
Explains the coding system for identifying product models and options.
Details specific made-to-order configurations and included kits for certain series.
Identifies and describes the function of key components like indication lights and buttons.
Covers electrical connection procedures, wiring routes, and ground terminal requirements.
Explains how to connect and disconnect the electrical connector safely.
Details wiring for NPN and PNP open collector outputs with circuit diagrams.
Explains how the switch operates based on exceeding or falling below set pressure values.
Guides the user through the steps to adjust pressure set values using the buttons.
Lists the default settings for various functions like switch output, indication color, and response time.
Outlines additional settings like indication mode and unit conversion.
Describes how to enable or disable the switch output function.
Explains the options for setting the display indication color.
Guides on setting the response time to prevent chattering.
Explains how to select between Hysteresis and Window comparator modes.
Describes how to set the hysteresis value for the switch.
Explains how to set the output type to normally open or normally closed.
Explains how to activate the power saving mode to reduce current consumption.
Details how to enable secret code input for key lock functionality.
Illustrates the operation of the Hysteresis mode for switch output.
Illustrates the operation of the Window comparator mode for switch output.
Guides on how to reverse the display orientation and button operations.
Explains how to select and change the pressure unit displayed.
Describes how to view and reset the maximum and minimum pressure values.
Explains how to adjust the displayed value to zero within a specific tolerance.
Details how to enable or disable key lock to prevent unintended operations.
Guides on locking and unlocking the unit without a secret code.
Explains the procedure for locking the unit with a secret code.
Details the procedure for unlocking the unit using a secret code.
Covers changing the secret code and the input procedure.
Explains how settings are retained and output recovered after power cuts.
Provides instructions for mounting the regulator, including torque and assembly steps.
Presents a flowchart for diagnosing issues when the pressure switch does not operate normally.
Continues the troubleshooting flowchart for abnormal display conditions.
Provides detailed problem, cause, investigation, and countermeasure for issues 1 to 5.
Details troubleshooting for errors like over current, system errors, and display fluctuations.
Covers issues like display turning off, flashing, inversion, and accuracy.
Addresses problems like unit change, button operation, loose body, noise, and unstable operation.
Explains the error codes, displays, types, and troubleshooting methods.
Lists detailed technical specifications for the ISE35 model.
Provides a technical drawing showing the physical dimensions of the product.
To Next Page