SMC Networks ISE35

-21-
No.PS※※-OMJ0004-E
●Indication unit ( ) (available with unit conversion function)
The indication unit can be selected freely.
Setting and display resolution
MPa
0.01
Kgf/cm
2
0.1
bar
0.1
psi
1
<How to perform>
1. Press the button three times in the measurement mode.
[ ] and current setting appears in turn.
2. Press the or button to select the indication unit
3. Press the button to enter the setting.
The measurement mode returns.
Caution
• If the indication units are changed, the set value and hysteresis should be set again.