-18-
No.PS※※-OMJ0004-E
7. Power saving mode ( )
When the power saving mode is selected, the value goes off to reduce current consumption.
<How to perform>
1. Keep pressing the button for 2 seconds or longer in the measurement mode.
After [ ] is indicated, press the button six times.
Then, [ ] and current setting appears in turn.
2. Press the or button to select the necessity of power saving mode.
3. Keep pressing the button for 2 seconds or longer after selection is completed.
Then, the setting is finished, and the measurement mode returns.
In the power saving mode, the key-in operation can return the normal display. Without key-in operation
for 30 seconds the power saving mode returns again (only in the measurement mode).
The display in power saving mode is as shown
on right figure.
8. Secret code input ( )
The necessity of secret code input for key lock can be selected.
<How to perform>
1. Keep pressing the
button for 2 seconds or longer in the measurement mode.
After [ ] is indicated, press the button seven times.
Then, [ ] and current setting appears in turn.
2. Press the or button to select the necessity of secret code.
3. Keep pressing the button for 2 seconds or longer after selection is completed.
Then, the setting is finished, and the measurement mode returns.
With secret code input, it becomes necessary to input the secret code to release key lock. The secret
code can be saving mode is returned again. The secret code can be decided optionally by the operator.
At the time of shipment, the secret code is set to "000".
With secret code input, refer to page 24.
To Next Page
Loading...
Need help?
General
