Use
38
5. The appliance will begin pre-heat...
6. ... and it will then proceed with the
selected function.
While the function is in progress, it is
possible to set a timer for a maximum of
4 hours (see “Timer during a function”),
a proving duration (see “Timed cooking”)
or delayed proving (see “Programmed
cooking”).
7. Press the control knob to make the
desired changes.
8. At the end of the function, “function
ended” is shown on the display and a
buzzer will sound that can be
deactivated by pressing the control
knob.
Unless otherwise set, the proving
will have a maximum duration of
13 hours.
The light inside the oven will
remain off during the proving
function.
It is not possible to modify the
temperature of the proving
function.
To Next Page
Loading...
