Cleaning and maintenance
66
Vapor Clean cycle setting
1. Turn the control knob to the right or left to
select the Vapor Clean function from the
“special functions” menu. Then press it to
confirm.
2. The duration and temperature of the
cleaning cycle will be shown on the
display.
3. Press the control knob twice to start the
cleaning cycle.
4. A buzzer will indicate the end of the
Vapor Clean cycle.
If the internal temperature is
greater than that required for the
Vapor Clean function, the cycle
will be stopped immediately and
“Internal temperature unsafe,
please wait until the oven is cool”
will be shown on the display.
Leave the appliance to cool down
before activating the assisted
cleaning cycle.
The duration and temperature
parameters cannot be changed by
the user.
To Next Page
Loading...
