EasyManuals Logo

Smeg BCC02 User Manual

Smeg BCC02
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
EN - 10
Cleaning the coffee grounds
container (12) and internal tray (13)
Always empty the coffee grounds
container with the appliance
switched on. This is the only way
of resetting the coffee grounds
counter. The counter resets at
least 15 seconds after opening
the various components and LED
23 ashes.
Remove the tray (14).
Remove the grounds container (12) with its
tray (13) by pulling it outwards.
Empty the coffee grounds from the container
(12).
Clean the container (12) and the tray (13)
in running water with neutral dish detergent.
Thoroughly dry components and reassemble
on the machine.
When emptying the grounds
container, be sure to also empty any
water residue from the internal tank.
Daily cleaning of the coffee grounds
container and internal tray is
recommended.
It is normal to nd water residue in
the internal tank. Clean and dry.
Cleaning the water tank (5)
Remove the lid (4) and remove the tank (5)
from the machine using the appropriate
handle.
Clean the tank (5) in running water with
neutral dish detergent and reassemble it in
the machine.
Cleaning the brewing group (15)
We recommend cleaning the
brewing group at least once a
week.
The coffee machine indicates when brewing
group cleaning is recommended (steady lit
LED 24).
With the machine on, press the lower part
of the door (8) until it is released and slide
it out from the top.
Press the two release clips (29) located on
the sides of the infuser (15) and remove it
from the machine
(Fig.L).
Wash the brewing group (15) with running
water and dry it.
Also thoroughly clean its housing and
relevant compartment and dry them before
reassembling the various components.
Ret the service door (8) making sure it is
correctly positioned.
Open the door and clean the
brewing unit while the machine is
on. This is the only way of resetting
the counter.
The counter resets at least 10
seconds after opening the various
components and LED 24 turns off.
We recommend running a manual
circuit cleaning cycle whenever this
operation is performed.
Please see paragraph “Manual
rinse” for this reason.
Do not wash the brewing group
in the dishwasher in order not to
damage it permanently.
Cleaning and maintenance

Other manuals for Smeg BCC02

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Smeg BCC02 and is the answer not in the manual?

Smeg BCC02 Specifications

General IconGeneral
Product typeEspresso machine
Built-in grinderYes
Capacity in cups1 cups
Grinder capacity150 g
Coffee input typeCoffee beans, Ground coffee
Coffee maker typeFully-auto
Country of originChina
Appliance placementCountertop
Water tank capacity1.4 L
Maximum operating pressure19 bar
Reservoir for brewed coffeeCup
AC input voltage220–240 V
AC input frequency50 - 60 Hz
Auto power off after (max)20 min
Package depth265 mm
Package width495 mm
Package height445 mm
Package weight7000 g
Quantity per pack1 pc(s)
Cord length1 m
Control typeButtons
Product colorRed
Built-in displayNo
Housing materialAluminium, Plastic
Pallet weight168000 g
Quantity per pallet24 pc(s)
Pallet GTIN (EAN/UPC)8017709301040
Quantity per pallet layer6 pc(s)
Number of layers per pallet4 pc(s)
Pallet net width800 mm
Pallet net height1900 mm
Pallet net length1200 mm
Pallet net weight120000 g
Weight and Dimensions IconWeight and Dimensions
Depth433 mm
Width180 mm
Height336 mm
Weight5000 g

Related product manuals